In this post, we're going to take you through the basics of masking threaded holes for your powder coating process. We've broken it down to the basics to make this process as easy as possible for you masking operations on your line.
In this post, we're going to try something different. Rather than sending different materials off to test their impact on sound absorption, we're going to develop a decibel meter test in-house that anyone could do. We're going to take you through this step-by-step. This may be a rough test, but if you start if you begin noticing an obvious difference in sound reduction between two materials, chances are you're probably on to something.
Learn how some of the top Automotive and Fluid Power manufacturers protect their critical components during storage and shipment. In this post, we'll take you through what material is best for your application, designing for assembly and removal, and more
Avoid adhesive tape difficulties this winter by reading our tips to achieve sufficient bonding pressure during these cold months so these failures don't happen.
We listed multiple ways you can speed up your masking process and be more efficient, saving time and money in the process.
In this post, we highlight one of our Project Managers, Nate Walker. The focus lies on his innovative work at Echo and how he landed his current position.
The burden of fluid connector part design and design for manufacturability has shifted from the OEM to the tier-1 supplier and their injection molding partner. Throughout this post, we’ll discuss what makes an injection-molded barbed connector technically complex, critical design elements that need to be factored in, and the molding expertise required to deliver a stable and repeatable part.
New case study on how Echo worked with a tier-1 automotive manufacturer to help transform their facility with engineered masking solutions for a large exterior injection-molded body panel that had complex paint quality requirements
In this post, we'll be covering the basics of cold runner injection molding systems. We'll go over what a cold runner system is, the mold cavity flow path elements, the two types of molds, and cold runner system advantages & disadvantages.
In this post, we'll be covering the basics of hot runner systems, a form of injection molding that has grown in popularity and usage over the years due to its key advantages over traditional cold runner systems. You'll learn what a hot runner system is, the different types, and the advantages & disadvantages of choosing this form of injection molding.
